Yaesu FTM-350 Series Manual page 70

APRS/PKT S
E14: BEACON STATUS TXT
Function:
Available Values:
Default:
SELECT:
TX RATE:
TEXT 1 ~ TEXT 5: Stores the Status Text. Each memory stores up to 60 characters.
E15: BEACON TX
Function:
Available Values:
70
ET
Enables/Disables the transmission of the Status Text and programs its
programmed.
1 SELECT: OFF, TEXT 1 ~ TEXT 5
2 TX RATE: 1/1 ~ 1/8, 1/2(FREQ) ~ 1/8(FREQ)
3 TEXT 1:
4 TEXT 2:
5 TEXT 3:
6 TEXT 4:
7 TEXT 5:
1 SELECT: OFF
2 TX RATE: 1/1
When this item is set to "OFF", the transceiver does not transmit the
Status Text.
When this item is set to one of the "TEXT 1" ~ "TEXT 5", the trans-
ceiver transmits the Status Text corresponding to the slot which you
have selected.
1/1 ~ 1/8: Selects the rate at which the Status Text is included with the
transceiver APRS beacon transmissions ("1/1" (every time) ~ "1/8"
(once in eight times)).
1/2(FREQ) ~ 1/8(FREQ): This selection is similar to "1/1~1/8" selec-
tions. Transmits the Status Text at the designated rate ("1/2" (once in
two times) ~ "1/8" (once in eight times)) when the APRS Beacon is
transmitted. However, the opposite band frequency data of the APRS
operation band, sub audio information (squelch type and its tone fre-
quency/code), and repeater shift frequency data always transmits when
the APRS Beacon is transmitted.
Enables/Disables the automatic transmission feature of the APRS bea-
con and selects its parameters.
1 AUTO:
2 INTERVAL:
3 PROPORTIONAL: ON or OFF
4 DECAY:
5 LOW SPEED:
6 RATE LIMIT:
M
ODE
OFF, ON, or SMART
30sec, 1min, 2min, 3min, 5min, 10min, 15min,
20min, 30min, or 60min
ON or OFF
1 ~ 99
5sec ~ 180 sec
FTM-350 S APRS ® M
ERIES ANUAL