Aprs Filter Setting - Yaesu FTM-350 Series Manual

R
The APRS filter option allows you to select the specific types of data to receive.
1. If necessary, press the [ F ] key repeatedly,
until the [ SMART FUNCTION ] key's cat-
egory changes to "S-2" mode.
2. Press the [ S FLT ] key to open the Set
Mode item "E35 SORT FILTER", then
rotate the left side [ DIAL ] knob to select
"2 FILTER" category.
3. Press the left side [ DIAL ] knob, then ro-
tate the left side [ DIAL ] knob to select the
"filter" you wish to exclude.
ALL:
MOBILE:
FREQUENCY: Displays only the APRS Beacons, which have frquency data.
OBJECT/ITEM: Displays only the APRS Beacons from Object or Item stations.
DIGIPEATER : Displays only the APRS Beacons from digipeaters.
VOIP:
WEATHER:
YAESU:
OTHER PKT:
CALL RINGER: Displays only the APRS Beacons of "CALL RINGER" stations, which
RNG RINGER: Displays only the APRS Beacons of "RNG RINGER" stations which
1200bps:
9600bps:
4. Press the left side [ DIAL ] knob to save the new setting, then press the [ ESC ] key to exit
from Set Mode.
5. Press the [ SORT ] key to initiate the sort-
ing.
FTM-350 S
ERIES
ECEIVING AN
APRS F
All received APRS Beacons are displayed (default).
Displays only the APRS Beacons of mobile stations.
Displays only the APRS Beacons from VOIP station, such as WiRES
stations.
Displays only the APRS Beacons from weather stations.
Displays only the APRS Beacons transmitted from a Yaesu transceiver,
such as the VX-8 series and FTM-350 series.
Displays only APRS Beacons from STATUS stations, RAW NMEA
data, and other packet data (except APRS beacon data).
Note: To display the stations including packet data (except APRS Bea-
con data), it is necessary to set the "OTHER" parameter of Set Mode
item "E03 APRS FILTER" to "ON".
are entered into Set Mode item "E10 APRS RINGER ( CALL ) ".
are defined via the Set Mode parameters of "E09 APRS RINGER".
Displays only the APRS Beacons with a 1200 bps baud rate.
Displays only the APRS Beacons with a 9600 bps baud rate.
APRS ® M
ANUAL
APRS
S
ILTER ETTING
The " " icon will appear before sorting. When the
sorting is finished, the " " icon will disappear.
® B
EACON
29