Yaesu FTM-350 Series Manual page 79

OBJECT/ITEM:
DIGIPEATER :
VOIP:
WEATHER:
YAESU:
OTHER PKT:
CALL RINGER:
RNG RINGER:
1200bps:
9600bps:
E36: VOICE ALERT
Function:
Available Values:
Default:
V.ALERT:
FTM-350 S
ERIES
APRS/PKT S
Only the APRS beacons from Object or Item stations are displayed.
Only the APRS beacons from digipeaters are displayed.
Only the APRS beacons from a VOIP station, such as WiRES stations
are displayed.
Only the APRS beacons from weather stations are displayed.
Only the APRS beacons transmitted from a Yaesu transceiver, such as
the VX-8DR/DE, VX-8GR/GE, FTM-350AR/AE etc. are displayed.
Only APRS beacons of STATUS stations including RAW NMEA data,
and APRS Beacons including packet data (except APRS beacon data)
are displayed.
Note: To display the stations including packet data (except the APRS
Beacon data), it is necessary to set the "OTHER" parameter of Set
Mode item "E03 APRS FILTER" to "on".
The transceiver displays only the APRS beacons of the "CALL
RINGER" stations, which are, entered into Set Mode item "E10 APRS
RINGER ( CALL ) ".
The transceiver displays only the APRS beacons of the "RNG
RINGER" stations which are defined via the Set Mode parameters of
"E09 APRS RINGER".
The transceiver displays only the APRS beacons with 1200 bps baud
rate.
The transceiver displays only the APRS beacons with 9600 bps baud
rate.
Enables/disables the Voice Alert function.
1 V.ALERT: OFF, TONE SQL, DCS, RX-TSQL, or RX-DCS
2 TSQL: 50 standard CTCSS tones
3 DCS: 104 standard DCS codes
1 V.ALERT: OFF
2 TSQL: 100 Hz
3 DCS: 023
When this item is set to "OFF", disables the Voice Alert function.
When this item is set to "TONE SQL", both the voice and APRS com-
munications are in Tone squelch operation. A blinking "TSQ" icon
will appear on the display.
When this item is set to "DCS", both the voice and APRS communi-
cations are in DCS (Digital Code Squelch) operation. A blinking "DCS"
icon will appear on the display.
When this item is set to "RX-TSQL", voice communication is in Tone
APRS ® M
ANUAL
M
ET ODE
79