Yaesu FTM-350 Series Manual page 68

APRS/PKT S
Default:
TX BEACON:
TX MESSAGE:
RX BEACON:
RX MESSAGE:
MY PACKET:
CALL RINGER:
RNG RINGER:
MSG VOICE:
68
ET
5 MY PACKET: OFF or ON
6 CALL RINGER: OFF or ON
7 RNG RINGER: OFF/1 - 100
8 MSG VOICE: OFF or ON
1 TX BEACON: ON
2 TX MESSAGE: ON
3 RX BEACON: ON
4 RX MESSAGE: ON
5 MY PACKET: ON
6 CALL RINGER: OFF
7 RNG RINGER: OFF
8 MSG VOICE: OFF
When this item is set to "ON", the transceiver emits an audible alert
ringer when an APRS beacon is transmitted.
When this item is set to "ON", the transceiver emits an audible alert
ringer when an APRS message is transmitted.
When this item is set to "ON", the transceiver emits an audible alert
ringer when an APRS beacon is received.
When this item is set to "ON", the transceiver emits an audible alert
ringer when an APRS message is received.
When this item is set to "ON", the transceiver emits an audible alert
ringer when your own APRS beacon is received via a digipeater.
When this item is set to "ON", the transceiver emits an audible alert
ringer when an APRS beacon including a callsign which is entered in
the Set Mode item "E10 APRS RINGER (CALL)".
When this item is set to a desired
value, the transceiver emits an au-
dible alert ringer when an APRS bea-
con is received from a station within
the selected range (The range unit
depends on the Set Mode item "E12
APRS UNITS").
When this item is set to "ON", the
transceiver audibly announces the
received APRS message and callsign
(requires the optional FVS-2 Voice Guide Unit). Normally, only the
call sign is announced. However, if the beginning of the message in-
cludes a "%" character, the entire message will be announced.
M
ODE
Your current position
: Emits the "Normal" alert ringer
: Emits the "RNG RINGER" alert ringer
FTM-350 S
Selected Range
APRS ® M
ERIES ANUAL