Callsign Ringer - Yaesu FTM-350 Series Manual

R
ECEIVING AN
You may enable an alert ringer (
specified station. Enter the callsign of the designated APRS beacon, via Set Mode item
"E10 APRS RINGER ( CALL ) ", in advance.
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select
Set Mode item "E10 APRS RINGER
( CALL ) ".
4. Press the left side [ DIAL ] knob, then ro-
tate the left side [ DIAL ] knob to select the desired memory channel.
5. Press the left side [ DIAL ] knob again, then enter your callsign by using the left side
[ DIAL ] knob (select the number/character) and [
Advice 1: You may also select the number/character of your callsign using microphone's
keypad too.
Advice 2: You may delete all data after the cursor that may have been previously stored
by pressing the [ CLR ] key. You may undo the erased data by pressing the [ ESC ] key
just after the erasing.
6. When you have completed entering your callsign, press the [
SSID slot.
7. Rotate the left side [ DIAL ] knob to select the SSID, then press the left side [ DIAL ]
knob to save the new setting.
8. Press the [ ESC ] key, then rotate the left
side [ DIAL ] knob to select Set Mode item
"E09 APRS RINGER".
9. Press the left side [ DIAL ] knob, then ro-
tate the left side [ DIAL ] knob to select the
"6 CALL RINGER" category.
10. Press the left side [ DIAL ] knob, then rotate the left side [ DIAL ] knob to select "ON ".
11. Press the left side [ DIAL ] knob to save the new setting, then press the [ ESC ] key twice
to exit from Set Mode.
:
A
You may set the backlight color which is illuminated when receiving an APRS beacon
to a desirable color for each APRS beacon via the Set Mode item "E08 APRS POPUP
COLOR"
When sorting the station list with the setting in Set Mode item "E35 SORT FILTER"
to "CALL RINGER" (described on the previous page), only the stations having this
setting will be sorted.
30
APRS ®
C R
ALLSIGN
) to sound when an APRS Beacon is received from a
FTM-350 S
B
EACON
INGER
] / [ ] key (to move the cursor).
ERIES
] key to move to the
APRS ® M
ANUAL