Yaesu FTM-350 Series Manual page 76

APRS/PKT S
E30: MY POSITION SET
Function:
Available Values:
Default:
GPS:
MANUAL:
P.LIST:
E31: MY POSITION
Function:
E32: MY SYMBOL
Function:
Available Values:
Default:
You may replace the default icon for ICON1, ICON2, and ICON3 to another type by rotat-
ing the left side [ DIAL ] knob.
Note: If you wish to change the USER icon, press the left side [ DIAL ] knob, then rotate the
left side [ DIAL ] knob to select the desired Symbol Table ID (left digits in the parenthesis),
then press the left side [ DIAL ] knob and rotate the left side [ DIAL ] knob to select the
desired Symbol Code (right digits in the parenthesis).
E33: POSITION COMMENT
Function:
Available Values:
Default:
Important Note: Only set this item to "EMERGENCY" when urgent help is needed, such
as an accident or a disaster.
76
ET
Determines your location (Longitude/Latitude).
GPS, MANUAL, or P.LIST GRP1-POINT1 ~ P.LIST GRP4-POINT4
GPS
Your location is determined by the optional GPS Unit. When the op-
tional GPS Unit is connected to the transceiver, select this item.
Your location is determined by Set Mode item "E31 MY POSITION".
Your location is determined from the "Point" list memory data. See
page 25 of the FTM-350 Series Operating Manual for details.
Program your location (Longitude/Latitude) manually.
See page 6 for details.
Select the icon, which will be displayed to identify your station on the
monitors of other stations.
ICON1, ICON2, ICON3 (46 symbols each), and USER (free select
character)
ICON1: , ICON2:
Selects position comment depending on your situation.
Off Duty, En Route, In Service, Returning, Committed, Special, Pri-
ority, Custom 0 ~ Custom 6, EMERGENCY!
Off Duty
M
ODE
, ICON3:
FTM-350 S
, USER:
APRS ® M
ERIES ANUAL