APRS/PKT S
Note
The CTCSS tone is set via "2 TSQL" parameter, and the DCS tone is set via "3 DCS"
parameter.
This transceiver always receives and memorizes all APRS signals regardless of the
setting of this menu.
When the Set Mode item "E17 DATA BAND SELECT" is set to "L=TX/R=RX" or
"L=RX/R=TX", the Voice Alert function does not operate.
80
ET
squelch operation, and APRS communication is No Tone operation. A
blinking "TSQ" icon will appear on the display except APRS trans-
mission.
When this item is set to "RX-DCS", voice communication is DCS
(Digital Code Squelch) operation, and APRS communication is No
Tone operation. A blinking "DCS" icon will appear on the display
except APRS transmission.
M
ODE
FTM-350 S
APRS
®
M
ERIES
ANUAL