Yaesu FTM-350 Series Manual page 36

T
RANSMIT AN
To transmit your APRS beacon manually, press the [ B-TX ] key on the "APRS Station List"
Window or "APRS Beacon Detail" Window.
You may transmit your APRS beacon manually from the frequency display window. To do
this, press the [ F ] key repeatedly, until the [ SMART FUNCTION ] key category changes to
"F-3" mode, if necessary, then press the [ B-TX ] key.
:
N
When receiving an APRS beacon via a Digipeater, a specific alert ringer (
heard.
Confirm that the Set Mode item "E30 MY POSITION SET" is set to "GPS" when the
optional FGPS-1 or FGPS-2 GPS Antenna Unit is installed. The transceiver will not
transmit an APRS beacon until GPS has acquired a GPS signal.
36
APRS
M T
ANUAL RANSMISSION
APRS Station List Window
APRS Beacon Detail Window
® B
EACON
FTM-350 S
ERIES
) will be
APRS ® M
ANUAL