Using The Aprs Set-Up Menu; Aprs Compass Setting; Model Code Display - Yaesu FTM-400DR Instruction Manual

Using the APRS Set-up Menu

APRS compass setting

This sets the direction of the compass panel on the APRS screen.
1
Press for one second or longer
The set-up menu will be displayed.
2
Select and touch [APRS]
3
Touch [1 APRS COMPASS] to select the direction of
the compass panel
The compass needle will switch between "Heading
UP" and "North UP" each time it is touched.
HEADING UP: This displays the direction of advance
NORTH UP: This fixes the north direction of the
compass scale at the top of the screen.
Tip Factory default value: Heading
4
Press for one second or longer
The direction of the compass panel will be set and the display will return to the
previous screen.

Model code display

The model code can be checked (but it cannot be changed).
1
Press for one second or longer
The set-up menu will be displayed.
2
Select and touch [APRS]
3
Select [2 APRS DESTINATION]
The model code will be displayed.
4
Press for one second or longer
The display will return to the previous screen.
of your own station at the top all the
time.
69