Setting The Baud Rate Of The Aprs And Data Communication - Yaesu FTM-400DR Operating Manual

Setting the baud rate of the APRS and data communication
The baud rate of the APRS (internal modem) and data communication (when using the
[DATA] jack at the back of the main body) can be set.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [DATA]
3
Touch [3 DATA SPEED]
The screen for the detailed settings will be displayed.
4
Touch [APRS] to select the packet communication
speed
The setting will switch between "1200 bps" and "9600
bps" each time it is touched.
1200 bps: Sets the speed as AFSK 1200 bps packet.
9600 bps: Sets the speed as GMSK 9600 bps
packet.
Tip Factory default value: 1200 bps
5
Touch [DATA] to select the data communication
speed
Repeat Step 4 to set the data communication speed.
Tip Factory default value: 1200 bps
6
Press for one second or longer
The baud rate of the APRS and data communication will be set and the display will
return to the previous screen.
Using the Set-up Menu
197