Table of Contents
Advertisement
Setting the operating band of the APRS and data communication
The operating band of the APRS (internal modem) and data communication (when using
the [DATA] jack at the back of the main body) can be set.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [DATA]
3
Touch [2 DATA BAND SELECT]
The screen for the detailed settings will be displayed.
4
Touch [APRS] to select the APRS operating band
The setting changes as follows each time it is
touched.
"A-BAND FIX" → "B-BAND FIX" → "A=TX/B=RX" →
"A=RX/B=TX" → "MAIN BAND" → "SUB BAND"
A-BAND FIX: The upper band will be selected.
B-BAND FIX: The lower band will be selected.
A=TX/B=RX: Transmits using the upper band and
receives using the lower band.
A=RX/B=TX: Receives using the upper band and
transmits using the lower band.
MAIN BAND: The main band will be selected.
SUB BAND: The sub-band will be selected.
Tip
Factory default value: B-BAND FIX
5
Touch [DATA] to select the data transmission
operating band
Repeat Step 4 to set the data communication
operating band.
Tip
Factory default value: B-BAND FIX
Using the Set-up Menu
199
Advertisement
Table of Contents
