Removing Expansion Cards; Preliminary Steps - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.2.2

Removing expansion cards

Upgrade and Repair Unit
(URU)
Tools: tool-less
9.2.2.1

Preliminary steps

Before removing an expansion card, perform the following steps:
Ê Locate the defective server as described in section
server" on page
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Disable boot watchdog functionality as described in section
SVOM boot watchdog functionality" on page
Ê Shut down the server as described in section
page 52.
Ê Disconnect the AC power cord from the system.
Ê If applicable, disconnect external cables to the expansion card.
Ê Remove the server cover as described in section
page 55.
178
44.
73.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Locating the defective
"Disabling BitLocker
"Disabling
74.
"Shutting down the server" on
"Opening the server" on
TX1320 M1