Removing An Fbu; Preliminary Steps - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.2

Removing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Do not throw FBUs into the trash can. Batteries must be disposed of in
accordance with local regulations concerning special waste.
For further safety information, please refer to section "Environmental
protection" in the FUJITSU Server PRIMERGY TX1320 M1 Operating
Manual.
9.3.2.1

Preliminary steps

Before removing an FBU, perform the following steps:
Ê Locate the defective server as described in section
server" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 55.
Ê Open the front cage as described in section
page 60.
192
44.
52.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Locating the defective
"Shutting down the
"Opening the server" on
"Opening the front cage" on
TX1320 M1