Removing The Backup Drive Filler Cover - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Accessible drives

12.4.1.2 Removing the backup drive filler cover

Figure 155: Removing the backup drive filler cover
Ê Hold the backup drive filler cover by its two handle recesses (1) and pull it
out of the installation bay (2).
V
CAUTION!
Save the backup drive filler cover for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
264 Upgrade and Maintenance Manual
TX1320 M1