Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual page 22

Servers
Hide thumbs Also See for PRIMERGY TX1320 M1:
Table of Contents

Advertisement

Before you start
Replacing a defective component
The global error indicators on the front and rear sides of your server as well as
local diagnostic LEDs on the front panel report defective hardware components
that need to be replaced. For further information on the controls and indicators
of your server, refer to the operating manual of your server and section
"Connectors and indicators" on page
325.
If the system has been powered off in order to replace a non-hot plug unit, a
system of PRIMERGY diagnostic indicators guides you to the defective
component. The "Indicate CSS" button enables the indicator next to the
defective component even if the server has been switched off and disconnected
from the mains. For further information, please refer to sections
"Using
diagnostics information" on page 43
and
"Connectors and indicators on the
front panel" on page
335.
If the defective component is a customer replaceable unit included in the CSS
concept (Customer Self Service, only available for EMEA market), the CSS
indicators on the front and rear side of the server will light up.
For further information, refer to the "ServerView Suite Local Service Concept
(LSC)" manual available online at
(EMEA market) or
http://manuals.ts.fujitsu.com
http://jp.fujitsu.com/platform/server/primergy/manual/
(Japanese market).
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.
22
Upgrade and Maintenance Manual
TX1320 M1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents