Installing A 3.5-Inch Hdd Module - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.3.2.2

Installing a 3.5-inch HDD module

Ê Detach and remove the Easyclick rails from the desired 3.5-inch HDD
installation bay.
Align the three pins on the Easyclick rails with the screw holes on the new
hard disk drive.
Figure 43: Installing the 3.5-inch HDD module locking lever
Ê Attach an Easyclick rail on each side of the new hard disk drive.
130 Upgrade and Maintenance Manual
TX1320 M1