Installing 3.5-Inch Hdd Modules; Preliminary Steps - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

SAS connectivity
Controller
Onboard
7.3.2

Installing 3.5-inch HDD modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
7.3.2.1

Preliminary steps

Before installing a 3.5-inch HDD module, perform the following steps:
Ê Shut down the server as described in section
page 52.
Ê Remove the server cover as described in section
page 55.
Ê Open the front cage as described in section
page 60.
Ê Locate the correct drive bay as described in section
inch HDDs" on page
TX1320 M1
Channel
1
128.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Connection
Drives 1-2
SATA cable (Y3963-V101) from
HDD backplane connector X1 to
system board connector SATA MLC 1.
Hardware: 5 minutes
"Shutting down the server" on
"Opening the server" on
"Opening the front cage" on
"Mounting order for 3.5-
129