Standard Power Supply Unit; Replacing The Standard Power Supply Unit; Preliminary Steps - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Power supply
6.1

Standard power supply unit

6.1.1

Replacing the standard power supply unit

Field Replaceable Unit
(FRU)
tool-less (preliminary and concluding steps)
Tools:
Phillips PH2 / (+) No. 2 screw drive (replacing the PSU)
6.1.1.1

Preliminary steps

Before replacing the standard PSU, perform the following steps:
I
You are advised to perform this routine with the server in a horizontal
position.
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Locate the defective server as described in section
server" on page
Ê Shut down the server as described in section
page 52.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 55.
108
73.
44.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Disabling BitLocker
"Locating the defective
"Shutting down the server" on
"Opening the server" on
TX1320 M1