Installing 2.5-Inch Hdd / Ssd Modules; Preliminary Steps - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.2.2

Installing 2.5-inch HDD / SSD modules

Customer Replaceable Unit
(CRU)
Preliminary and concluding steps: tool-less
Tools:
Installing a 2.5-inch HDD / SSD module: tool-less
7.2.2.1

Preliminary steps

Before installing a 2.5-inch HDD / SSD module, perform the following steps:
Ê Remove the hard disk drive cover as described in section
hard disk drive cover" on page
Ê Locate the correct drive bay as described in section
inch HDDs / SSDs" on page
118
59.
117.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing the
"Mounting order for 2.5-
TX1320 M1