WebGuard
Highlight Use WebGuard Service and press the
for detailed descriptions of the WebGuard service.
Highlight the box beside Port and press the
the Up and Down arrow buttons to increase or decrease the numbers.
VNC
Highlight Use VNC (Virtual Network Computing) and press the
be able to change the settings if Use VNC is enabled.
NOTE: VNC service allows you to access the DVR and control it remotely using a PC or mobile devices via Ethernet.
Highlight the box beside Port and press the
system administrator.
Figure 30: Network – WebGuard setup screen.
button to toggle between On and Off. See Appendix – WebGuard
button. Set the port number used when accessing WebGuard by using
Figure 31: Network – VNC setup screen.
button. Set the port number of the VNC server obtained from your
Digital Video Recorder
button to toggle between On and Off. You will
43