Table of Contents
Advertisement
User's Manual
Selecting
located at the bottom displays the Search menu.
Go to: Displays the first or last recorded image, or searches by date and time (see the previous
Searching Video – Go To section of this chapter for more details).
Clip-Copy: Clips a video segment and saves it (see the following Clip Copy section for more
details).
Zoom: Zooms the current playback image.
Enable De-Interlace: Turns the de-interlace filters on.
Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
The individual playback controls at the bottom perform the following functions as described below:
Go to the previous image
Fast backward play
Selecting
in the top-left corner exits the Record Table Search screen.
Motion Search
Figure 62 ─ Text-In Search screen.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
Highlight the box beside To and press the
specific Date and Time. When set to On, the search will be from the last recorded image.
Highlight the box beside Type and press the
Motion Search detects motion in the defined area. Museum Search detects if a defined object has moved.
Highlight the box beside Zone and press the
can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion.
NOTE: When setting the Museum Search Zone, the zone should be placed inside of the border line of the target
object. If the selected block is placed on the border line, the sensitivity of the Museum Search may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside Sensitivity and press the
(high sensitivity).
48
Play
Fast forward play
The Motion Search... can be selected from the Search menu
while the DVR displays the camera full screen. The Motion
Search screen displays a list of motion events. Use the arrow
buttons to highlight the event for which you would like to
see video and press the
associated with the selected event on the small search screen.
Highlighting Close and pressing the
video associated with the Motion event and display the first
image of the event. Pressing the
the "event" video segment. Pressing
returns to live monitoring.
You can search video from the first to last recorded images, or you
can set the start and stop times and dates.
Highlight the box beside From and press the
between On and Off. When set to Off, you can enter a specific Date
and Time. When set to On, the search will be from the first
recorded image.
button to toggle between On and Off. When set to Off, you can enter a
button. You can select between Motion Search and Museum Search.
button. An image from the video appears with a grid overlaid. You
button. You will be able to select from 1 (low sensitivity) to 5
Go to the next image
(Enter) button to display the video
button will extract the
button will start playing
Playback Mode
button to toggle
button
Advertisement
Table of Contents
