Calendar Search; Motion Search; Figure 75 - Calendar Search Screen; Figure 76 - Motion Search Screen - Eneo DLR4B-08/500DV Operating Instructions Manual

Selecting in the top-left corner exits the Record Table Search screen.

Calendar Search

Figure 75 — Calendar Search screen.
If the DVR's time and date have been reset to a time that is earlier than some recorded video, it is possible for the DVR
to have more than one video stream in the same time range. Move to Select a Segment, and select the video stream you
want to search. Refer to the Appendix – Time Overlap for further information on searching time-overlapped video streams.
NOTE: The lower number of the Segment indicates the latest recorded video.
Once you have set the date and time you want to search, highlight Go and press the
time will display.
NOTE: It is possible that no recorded image displays on the current screen. Press the
change the screen mode to 4x4. You will be able to easily see the camera have recorded video during
target time.

Motion Search

Figure 76 — Motion Search screen.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
Days with recorded video display on the calendar with white
numbers. You can highlight the days with recorded video by
using the arrow buttons. Once you have highlighted a day,
press the (Play/Pause) button to select it.
A time bar displays at the bottom of the calendar. Hours in
which video was recorded will be highlighted with blue. You
can use the Up and Down arrow buttons to highlight the time
bar. Once the time bar is highlighted, you can select the time
by using the Left and Right arrow buttons .
NOTE: The time bar is in one-hour segments. If a segment
is highlighted, it means that some video was
recorded during that hour. However, it does NOT
mean video was recorded for the entire hour.
The Motion Search... can be selected from the Search menu
while the DVR displays the camera full screen. The Motion
Search screen displays a list of motion events. Use the arrow
buttons to highlight the event for which you would like to see
video and press the
associated with the selected event on the small search screen.
Highlighting Close and pressing the
the video associated with the Motion event and display the
first image of the event. Pressing the
playing the "event" video segment. Pressing
returns to live monitoring .
You can search video from the first to last recorded images, or you
can set the start and stop times and dates.
Highlight the box beside From and press the
between On and Off. When set to Off, you can enter a specific Date
and Time. When set to On, the search will be from the first recorded
image. When highlighting
bookmark list displays and the bookmark point you selected will be
the starting date and time.
Digital Video Recorder
button. The selected date and
button and
DISPLAY
(Play/Pause) button to display the video
button will extract
button will start
PLAYBACK
button to toggle
and pressing the button the
59