Device Setup; Alarm-Out; Figure 24: Device - Alarm-Out Setup Screen - Eneo DLR-2104/1.0TBV Operating Instructions Manual

Device Setup

Alarm-Out

Highlighting the box beside Dwell Time and pressing the
output. Dwell times range from 5 seconds to 30 minutes.
Each alarm output can be given its own title by highlighting Title... and pressing the
appears allowing you to enter the title.
You can add and edit alarm output schedules on this screen. Highlight the + and press the
Highlighting the boxes under the Column heading and pressing the
those boxes.
The Day box allows you to select the days that the alarm schedule will be active. The choices are: Sun, Mon, Tue,
Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the alarm schedule will be active in 15-minute increments from 00:00
to 24:00.
The Mode box allows you to set how the alarm reacts during the scheduled time. When set to On, the Alarm-Out is
active during the scheduled time. When set to Event, the Alarm-Out is only active when there is an Event during the
scheduled time.
The Channels box allows you to set which alarm outputs will be active. You can also select the DVR's internal buzzer.
The box allows you to delete an alarm output schedule. You will be asked to confirm whether or not you really wish
to delete the schedule.
Figure 24: Device – Alarm-Out setup screen.
button allows you to set the dwell time of the alarm
button. A virtual keyboard
button allows you to edit the information in
Digital Video Recorder
button to add a schedule.
37