Record Setup; Recording Operations - Eneo BLR-3004 Operation Instructions Manual

RECORD SETUP

To configure the recording behavior of the DVR, highlight „RECORD MENU‟ and press „ENTER‟.

RECORDING OPERATIONS

SCHEDULE MODE : Either DAILY (one schedule will apply to every day of the week) or WEEKLY
PRE-EVENT RECORDING TIME : When the DVR is not in continuous recording mode, this setting
POST-EVENT RECORDING TIME : When the DVR is not in continuous recording mode, this setting
DUAL STREAM :User can set 2
When user selects „Manual‟ for quality control, user can set quality for 2
From the Main Menu, click on the „RECORD‟ menu.
(each day of the week has its own schedule).
determines the amount of footage that is always recorded before
an event occurs. (motion detection, alarm input, etc.)
determines the amount of footage that is always recorded after an
event occurs. (motion detection, alarm input, etc.)
nd
data stream for network data transmit.
Click on the „RECORDING OPERATIONS‟ menu.
Click on any field, and use the
41
button to modify the value.
nd
stream also.