Configuring The Optional Barcode Scanner - Pitney Bowes DM1100 Operator's Manual

5 • Mailing System Setup
Configuring
15
the Optional
Barcode
Scanner
5-20
If you have a barcode scanner attached to your mailing system, you can
configure it to scan:
• account names,
• account codes (Business Manager only),
• speed codes (Budget Manager only),
• Custom and Normal Presets,
• Job IDs, or
• Postal Codes
if you are in the Budget Manager or Business Manager accounting sys-
tems.
Refer to the appropriate topic in this section:
• If you are using an accounting system on your mailing system you can
set the default scan type so that your system recognizes your particular
accounting application when it scans the barcode. Refer to Setting the
Default Scan Type.
• If you are attempting to scan barcodes that were defined for other
accounting systems and those accounts contain a prefix, you can set
up your system to recognize that prefix when it scans in the barcode.
Refer to Adding Barcode Prefixes.
• If you need to combine multiple barcode scans into a single barcode,
refer to Combining Barcodes.
• If you want your system to require an operator to press the Enter key to
accept each barcode value after it is scanned and displayed on the
IntelliLink® Control Centre screen, refer to Setting Auto-Enter.
SV62220 Rev. A