Pitney Bowes DM1100 Operator's Manual page 155

Ink Capacity
Internal Modem
Telephone Cord for Analog Line
Advertisements
Permit Mail Image
Optimum Performance (Throughput)
Mail Processing Speed Maximum Pieces per Minute (PPM)
Model*
DW20
* Model numbers are on labels located under the main cover on the real panel of your mailing system.
The actual throughput of the system varies depending on the material processed, system condition,
and operator skill.
• Gummed tape throughput 35-40 tapes per minute, depending on the model.
• Adhesive tape throughput is 40 tapes per minute with digital indicia only and 35 tapes per minute
with advertisements.
SV62220 Rev. A
DM1100™ Digital Mailing System Operating Guide
45,000 pieces with no advertisements or permits,
30,000 pieces with advertisements or permits
1.5 years shelf/installed life
Ink Usage Messages
• Order Ink - This message indicates that there are
approximately 10 days of ink remaining. This message
is drop count controlled and calculated by a chip within
the print head carriage.
• Low Ink - This message indicates that there are approx-
imately 2 days of ink remaining. This message is drop
count controlled and calculated by a chip within the print
head carriage. Approximately 5 days of printing remain
before the Ink Out message appears.
• Ink Out - When this message appears, the mailing
machine stops. This function is controlled by the S2
sensor needles that protrude into the bottom of the ink
cartridge.
56 Kbytes/sec
26 AWG or smaller
Up to 10 custom advertisements plus preloaded advertise-
ments (see Chapter 12 in this guide for a list of the pre-
loaded advertisements).
Maximum number of images is 3. Maximum identifying
image name length is 15 characters. (An option you may be
able to purchase. Not available on all systems.).
In W-O-W™ Mode
up to 145 PPM
In Non-W-O-W™ Mode
up to 295 PPM
12-3