Pitney Bowes DM1100 Operator's Manual page 141

Tape Feeding Problems
Description
Gummed tape is not
wet.
(continued)
SV62220 Rev. A
DM1100™ Digital Mailing System Operating Guide
Possible Causes
Brush not out far enough to reach
tape.
Valve in moistener bottle cap is
not working.
Low E-Z Seal® Sealing Solution
message is not working.
Solution
1. Move the tape lever to the up position.
2. Move the brush lever to the right to pull the
brush mechanism forward.
Brush Lever
3. Remove the brush.
4. Pull out brush and readjust to longer length.
5. Reinstall brush and release holder to return
original position.
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Tape
Lever
10-11