Pitney Bowes DM1100 Operator's Manual page 47

Mode Selection:
Manual Weight
Entry
SV62220 Rev. A
DM1100™ Digital Mailing System Operating Guide
To perform manual weight entry:
1. Press the Mode key.
2. Select Manual Weight Entry.
• For Imperial weight: Enter number of pounds. Press theright
arrow key to enter the number of ounces.
• For Metric weight: Enter number of kilograms. Press decimal (.)
then numbers to add grams. For example: 1 kg + 50 g would be
entered 1.050.
3. Press the Class key and select the class if you have not done so
already. For more information, refer to "Selecting the Class, Carrier,
Special Services or Options" in this chapter.
NOTE: If the weight you enter is invalid for the class, you are prompted to
select another class.
4. If necessary, select a special service and press Enter. Even if you do
not choose a special service, you must press the Enter key to confirm
the class.
5. If required, select an account by pressing Account and following the
prompts. (For further details, see Selecting/Deselecting an Account to
Print Postage.)
6. If necessary, adjust the thickness adjustment knob and the light mail/
postcard selection knob.
7. If printing on a piece of mail, press the Seal key and select your sealing
option. Place the mail on the scale, then remove it from the scale and
place on feed deck; press Start to begin the mail run.
8. If printing on a piece of tape, move the tape lever up for wet tape and
down for dry or pressure-sensitive tape. To print tape, press the Tape
key.
4-13