System View - Bosch AMAX 2100 Installation Manual

AMAX 2100 / 3000 / 4000
8
9
*
0
The maximum length of an area name is ten characters.
Company Name
This option is used to name the company. Therefore, the numbers on the text keypad function
as an alphabetical input. (Refer to the explanation above.)
Voice Default
This option enables/disables the voice default settings for the domestic call. If DEFAULT
VOICE YES is selected, all recorded voice messages are deleted and the default tone is used
for domestic calls. For more information on recorded messages and domestic calls, refer to
Call back and Domestic Call, page 44.
Schedule Programming
This function is used to schedule operations according to the needs of the users. The
following operations can be scheduled:
–
–
–
It is possible to schedule up to 16 operations on a daily or hourly basis.
How to program a schedule
Notice!
Please note that this function can only be accessed and programmed via the PC software A-
Link Plus.
1.
2.
3.
4.
P
7.5.2

System View

Fault Analysis
This option display faults and tampers. The AMAX panel can display eight categories of 41
types of system faults and tampers.
How to display faults and tampers via a text keypad
In a text keypad the faults and tampers are displayed directly.
Bosch Sicherheitsysteme GmbH
t u v 8 ù ú û ü ű ţ
w x y z 9 ý þ ź ż ž Ÿ
Switches between small letters and capital letters
space 0 ; + & % * = < > £ € $ ¥¤ [ ]{}\ ~ ^ ` ¿ ¡ § # |
Arming/disarming
Switching output on/off
Activating/deactivating users
Select the function you want to schedule. The following function can be selected:
Arm (area 1 – 16)
Disarm (area 1 – 16)
Switch on output (output 1 – 20)
Switch off output (output 1 – 20)
Activate user (user 1 – 250)
Deactivate user (user 1 – 250)
Enter the desired time (hh:mm) and the date (dd/mm) for the schedule.
Choose the selected days for the schedule (yes/no for each weekday).
Optionally select a exception (e.g. for holidays)
The schedule is programmed and can be enabled/disabled by the user.
Installation Guide
Settings | en 69
2014.11 | 02 | F.01U.267.112