Bosch AMAX 2100 Installation Manual page 57

AMAX 2100 / 3000 / 4000
1.
2.
3.
23 - External Fault
The external fault zone type performs as described below:
1.
2.
3.
24 - Technical Alarm
The technical alarm zone type performs as described below:
1.
2.
3.
25 - Reset
The reset zone type performs as described below:
1.
2.
3.
Bosch Sicherheitsysteme GmbH
Disarm:
– Zone normal - no alarm / no report
– Zone triggered - no alarm / no report
AWAY Arm:
– Zone normal - no alarm / no report
– Zone triggered - no alarm / no report
– Zone triggered - during exit time - no alarm / no report
– Zone triggered - during entry time - no alarm / no report
STAY Arm: same as AWAY Arm performance.
– This zone is mainly for prevention of arming (to ensure exit/entry door is locked
before arming the system and no alarm occurs when entering the premise through
the entry/exit door).
Disarm:
– Zone normal - no alarm / no report
– Zone triggered - fault / report
AWAY Arm:
– Zone normal - no alarm / no report
– Zone triggered - alarm / report
– Zone triggered - during exit time - fault / report
– Zone triggered - during entry time - fault / report
STAY Arm: same as AWAY Arm performance
– The restore report will be sent when the zone is restored.
Disarm:
– Zone normal - no alarm / no report
– Zone triggered - alarm / report
AWAY Arm:
– Zone normal - no alarm / no report
– Zone triggered - alarm / report
– Zone triggered - during exit time - alarm / report
– Zone triggered - during entry time - alarm / report
STAY Arm: same as AWAY arm performance.
– A technical zone does not send a restore report until the zone is restored.
Disarm:
– Zone normal - no alarm / no report
– Zone triggered – performs system reset / no report
AWAY Arm:
– Zone normal - no alarm / no report
STAY Arm: same as AWAY arm performance
Installation Guide
Settings | en 57
2014.11 | 02 | F.01U.267.112