Users And Codes; User Code; Installer Code - Bosch AMAX 2100 Installation Manual

AMAX 2100 / 3000 / 4000
7.2

Users and Codes

The AMAX system provides two types of access codes, the installer codes and user codes.
Each of them allows specific access and operation of the AMAX panel functions.
7.2.1

User Code

The default user code is "2580". This code should be changed to an individual code. If a new
user is assigned, an individual user code is assigned to this user.
Notice!
Identical codes are not allowed. User codes are not permitted to be the same as the installer
code.
User Code Permission Level
User codes can differ in permission levels. Each user code is assigned to a permission level.
Code Permission Level
00
01
02
03
04
05
06 -15
Table 7.3: Code Permission Level
Please refer to Installer Code, page 45 for a description of the user permission levels.
User Code in Area
Any area can be assigned individually to a specific user.
7.2.2

Installer Code

The installer code is designed to program the AMAX panel. In addition, the installer code is
used for some code commands.
The default installer code is "1234". This code should be changed to an individual code.
Notice!
Identical codes are not allowed. User codes are not permitted to be the same as the installer
code.
Quick keypad operations
The following table shows an overview of the quick keypad operations and the corresponding
user permissions of user codes and installer codes.
Bosch Sicherheitsysteme GmbH
User Type
Master User 1
Master User 2
Super User
Basic User
Arming User
Duress User
No Priority
Installation Guide
Settings | en 45
2014.11 | 02 | F.01U.267.112