Arming The System; Arming In Away Mode - Bosch TouchOne User Manual

2.3 Arming the System

2.3.1 Arming in AWAY Mode

When you leave your premises and
require all zones to be in a ready
state to detect intrusion, arm the
system in AWAY Mode. There are
two different methods for arming
the system in AWAY Mode. Method
one is optional and can be disabled
by your installer if you do not
want to use single button arming.
Method two is standard and always
operates.
4
Figure 2: Keypad Screen
Method One (Quick Arm) 1. From the Home Screen, touch the Arm Area button.
Two beeps will sound and the Area Status Card changes.
Note: if you have multiple areas enabled, you will need to enter
your user code. If your user code has authority for both areas,
both areas will arm.
Method Two 1. From the Home Screen, touch and drag the Area
Status Box you want to arm.
2. Drag the Area Status Box into the Away Arm circle.
3. Enter your user code.
Two beeps will sound and the Area Status Card changes.
Method Three 1. Touch the Keypad button to show the Keypad
screen.
2. Enter your user code followed by the [#] button (for
example, [2580 #]).
Two beeps will sound and the Area Status Card changes.
5