Synapse Installation Guide
Accessing the Administrator WebUI
To access the browser interface and log on:
1. Ensure your computer is connected to the same IP subnet as the Synapse system.
You can connect your computer to the PC port on the back of a Deskset.
2. On the Deskset, press MENU and then 4. The Deskset Information screen appears.
Deskset Information
Model No:
Status:
IP Address:
MAC Address:
Serial No:
Boot Ver:
P Firmware Ver:
Use
done.
030/031 Deskset Information Screen
3. Find the IP address on the Deskset Information screen.
4. On your computer, open an Internet browser.
5. Type the Deskset IP Address in the browser address bar, and press ENTER on your
computer keyboard.
The Login page appears in the browser.
6. Enter admin in the Login Name field and 12345 in the Password field, then click
The System Information page appears.
System Configuration
SB67031
Synchronized*
192.168.0.10
00:11:A0:11:EA:4D
GG20013043
or
to scroll. Press Exit when
You can also use a Gateway IP address (shown in
log on to the WebUI.
. You may change the Admin ID and password once you have logged on.
77
2.7.1
'HVNVHW ,QIRUP DWLRQ
3..
0RGHO 1R
Quick
Dial
6WDWXV
,3 $GGUHVV
Exit
020/025 Deskset Information Screen
Back to Contents
6%
6\QFKURQL]HG
Figure 34 on page
61) to