Set/Edit Static Ip - AT&T SB67010 PSTN Installation Manual

Synapse Installation Guide
To set the IP Configuration:
1. From the SB67020/025 Deskset IP Settings menu, press 1 to select
IP Configuration.
From the SB67030/031 Deskset IP Settings menu, go to Step 2.
2. Press
IP Settings
1. IP Configuration

2. Set/Edit Static IP

3. IP Status
Use
Use
Save
030/031 Deskset IP Configuration
3. Press
Set/Edit Static IP
If your business requires a static IP address, contact your network administrator.
To set and edit static IP Address:
1. Access the Admin Settings menu:
a. Press MENU, and then press 3 on the dial pad.
b. Enter the Admin password, and then press SELECT.
2. Press 3 on the dial pad to display the IP Settings screen.
3. Press 2. The Set/Edit Static IP screen appears.
Static IP Edit
IP Address:
Subnet Mask:
Gatew ay:
DNS Server:
Use dial pad to enter digits and press #
to enter a dot.
Save
030/031 Deskset Set/Edit Static IP
4. Enter digits. There is a 12-digit limit on the number field (not including dots).
On the SB67030/031 Deskset, press the pound key (#) to insert a dot.

On the SB67020/025 Deskset, press
Getting Started
 
to select Auto or Static.
or
Auto
or to mov e highlight.
Quick
or to cy cle through options.
Dial
to accept the changes and return to the Admin Settings menu.
Save
Quick
Dial
Backspc
IP Configuration
Set IP to:
Save
020/025 Deskset IP Configuration
Set/Edit Static IP
IP Address:
Subnet Mask:
Save
020/025 Deskset Set/Edit Static IP
to insert a dot.
"."
72
Back to Contents
Auto
"." Backspc