Sip Gateway Features - AT&T SB67010 PSTN Installation Manual

Synapse Installation Guide

SIP Gateway Features

Figure 32 illustrates the SIP Gateway features and connections.
1
1. Display
2. Reset
3. AuxNet Port
4. RJ-45 Ethernet LAN Port
5. DC 12V Power-Supply Jack
Getting Started
2 3
Figure 32. SIP Gateway Features and Connections
Provides system and network status, device information,
and configuration data. See
Interface" on page
Restarts the Gateway when pressed momentarily.
Restores factory defaults when pressed and held for
more than five seconds with the LAN cable not
connected.
Reserved for future use. This Ethernet port will be
enabled in a future product upgrade.
Connects to the Synapse network.
10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
59
Back to Contents
4
"Gateway Front Panel
61.
5