Synapse Installation Guide
Battery Charging
Charge the handset battery for at least 16 hours before use. When fully charged, the
handset battery provides approximately five hours of talk time or three days of standby
time.
To charge the handset battery:
Place the handset in the charger, as shown.
The CHARGE light is on when the handset is charging.
If the handset has not yet been registered, the Register screen appears within 15
seconds.
Place the handset in the charger when not in use.
Installation
12:00a Jan. 00
12:00a Jan. 00
REGISTER
To register Handset:
1. Go to your
Deskset.
2. Press MENU.
3. Select User
To register the handset, follow the on-screen instructions or see the
"Handset Registration" section in the AT&T SB67040 Cordless Accessory
Handset Quick Start Guide that was packaged with the handset and
www.telephones.att.com/synapseguides
available at
50
Back to Contents
CHARGE
Light
1/3
.