Synapse Installation Guide
5. Corded Headset
Jack
6. Corded Handset
Jack
7. Wall-Mount Slots
To attach the Desktop Stand for desktop installation:
1. Select a Deskset position. The desktop setup requires the Deskset Stand and provides
two positions, Option 1 at 45° and Option 2 at 60°, as shown in Figure 20. If you use
Option 2, rotate the handset tab as explained in
and Deskset Option 2 installation:" on page
2. Place the Deskset on a flat surface with the power and network ports facing you, as
illustrated in Figure 22.
3. Place the stand, illustrated in Figure 21, on the base with the flexible tab side away
from you.
4. Insert the solid tabs of the stand into the Option 1 or Option 2 slots on the base that
are marked in red in Figure 22.
Installation
Actual jack location may be different than shown.
For connecting the corded handset to the Deskset base using
the supplied handset cord.
See
"To install the Deskset on a wall:" on page
38.
Option 1
Option 2
Figure 20. Deskset Stand Options
Flexible Tabs
Figure 21. Deskset Stand Tabs
37
Back to Contents
41.
"To rotate the handset tab for wall