System Configuration - AT&T SB67010 PSTN Installation Manual

Synapse Installation Guide
S
YSTEM
You can configure the Synapse system using the WebUI. The WebUI opens in your Web
browser and has editable settings for the system and each Synapse device. The WebUI
is embedded in every Synapse device. When you access the WebUI, you are accessing it
on the device, not on the Internet.
This chapter shows you how to access the WebUI. This chapter also lists the settings you
may have to configure to commission a basic Synapse system with Gateways, Desksets,
ATAs, and an optional fax machine and paging system.
To configure the SB67080 Expansion Module, see the SB67080 Expansion Module
Installation and Configuration Guide at
www.telephones.att.com/synapseguides
To fully configure a newly installed Synapse system, see the Synapse
Administrator's Guide at
The feature descriptions and sample screens in this chapter are from a system
that includes optional devices. Your Deskset screens and WebUI pages may be
different. For example, if your system does not include an ATA, the Fax
Configuration, Group Mailbox, Overhead Paging, and ATA Settings links do not
appear in the WebUI menu.
This chapter also includes some settings you may have to configure as part of the
installation process:
"Configuring a Trunk Port (FXO) Door Phone" on page 82

"Line Configuration" on page 88

"Updating Devices" on page 89

"Product Registration" on page


System Configuration

C
ONFIGURATION
www.telephones.att.com/synapseguides
92.
75
Back to Contents
C
H A P T E R
3
.
.