Upgrade Deskset Software - AT&T SB67010 PSTN Installation Manual

Synapse Installation Guide

Upgrade Deskset Software

See "Updating Devices" on page 89
To access the Deskset Software Upgrade feature:
1. Access the Admin Settings menu:
a. Press MENU, and then press 3 on the dial pad.
b. Enter the Admin password, and then press SELECT.
2. Press 5. The Software Upgrade screen appears. The system scans for an upgrade.
Software Upgrade
&XUUHQW ,PDJH 9HUVLRQ
V\QDSVHGVSHWUDYLPJ
030/031 Deskset Software Upgrade
If an upgrade is available, a Found New Version screen appears.

If no upgrade is available, a No New Version screen appears. Press

[030/031] or CANCEL [020/025] to return to the Admin Settings menu.
3. Press
Software Upgrade
Upgrading, Wait For Reboot
&XUUHQW ,PDJH 9HUVLRQ
V\QDSVHGVSHWUDYLPJ
$YDLODEOH ,PDJH 9HUVLRQ
V\QDSVHGVSHWUDYLPJ
030/031 Deskset Upgrading
If the device is sluggish or unresponsive during the upgrade process, see
Synapse device becomes sluggish or unresponsive during or immediately after
software upgrade." on page
The Deskset automatically resets at the end of the software upgrade process. If a PC is
connected to the Deskset that you are using, any network traffic involving that PC halts
until the Deskset has resumed operation. Avoid updating the Deskset when the user is
likely to be at the workstation.
Getting Started
Scanning for Upgrades...
4XLFN
to install the upgrade. The Upgrading screen appears.
Upgrade
4XLFN
'LDO
([LW
to update the Deskset software using the WebUI.
6RIWZDUH 8SJUDGH
6FDQQLQJ IRU XSJUDGHV
V\QDSVHGVYLPJ
'LDO
([LW
020/025 Deskset Software Upgrade
6RIWZDUH 8SJUDGH
8SJUDGLQJ  :DLW IRU UHERRW
V\QDSVHGVY LPJ
020/025 Deskset Upgrading
116.
74
Back to Contents
Exit
"A