AT&T SB67010 PSTN Installation Manual page 71

Synapse Installation Guide
If the host is found, but there is no new software available, then the No New Version
message appears.
If the device is sluggish or unresponsive during the upgrade process, see
Synapse device becomes sluggish or unresponsive during or immediately after
software upgrade." on page
3. If new software is available, you are prompted to initiate the upgrade by pressing
Once the downloading starts, the display indicates the progress as shown by the
percentage indicator. The device restarts automatically once the programming is
completed.
If the programming process is interrupted by removing the server connection, no

restart occurs. The process does not resume even after the server connection is
reestablished. The ATA remains on the xx% complete screen until an action is
taken at the ATA.
Pressing

returns you to the Configuration menu. The previous software version remains in
effect.
When the upgrade is complete, the screen briefly displays 100% complete,

then 0% complete for few seconds, before restarting the ATA.
4. Press
Getting Started
For more information, see the Synapse Administrator's Guide at
www.telephones.att.com/synapseguides
, or abort by pressing
during the programming process terminates the download and
repeatedly until you return to the ATA main menu.
70
116.
.
Back to Contents
.
"A