Web User Interface (WEBUI) Overview
Once a Gateway and at least one Deskset are connected to the LAN, you can use the Web User Interface (WEBUI) to administer
the system. Only one person should log in as System Administrator at a time to prevent accidentally overwriting and losing
intended changes.
To access the Browser Interface:
Figure 22. Deskset Information Screen
Figure 23. Browser Entry
AT&T SB67010/AT&T SB67030 Installation Guide
1. On your Deskset, click MENU.
2. To display the Deskset Information screen shown in Figure 22,
IP Address
3. Find your IP Address
4. Open a browser on a
5. Type the Deskset IP
IP Address
6. Enter admin in the Login Name: field and 12345 in the Password
press 4 on the dial pad.
on the Deskset
Information screen.
PC on the same
network as the
Deskset. AT&T
recommends Internet
Explorer 6 or higher
for best performance.
address in the address bar, as show in Figure 23, and press ENTER. The
Browser displays a login screen, as shown in Figure 24.
field, then click
. You may change your User ID and password
once you are logged in.
16
Figure 24. Login
Web User Interface (WEBUI) Overview