Mdc Modem - Toshiba Portege M200 Maintenance Manual

4.10 MDC modem

4.10 MDC modem
Removing the MDC modem
The following describes the procedure for removing an MDC modem. (See Figure 4-14.)
Caution: The power must be turned off when you remove the MDC modem. Removing
an MDC modem with the power on risks damaging the modem or the
computer itself.
1. Remove the following screws securing the MDC modem.
• M2×4Z
2. Remove the MDC modem from the connector on the system board.
3. Disconnect the cable from the MDC modem.
4. After peeling off the glass tape, turn up the insulator and disconnect the MDC
modem cable from the connector on the system board.
Portege M200 Maintenance Manual (960-457)
BIND screw
M2 x 4Z BIND
Figure 4-14 Removing the MDC Modem
4 Replacement Procedures
x2
MDC modem
PJ3020
4-23