Toshiba Portege M200 Maintenance Manual page 256

4.24 Fluorescent Lamp
Caution: Be careful not to damage the cell, TAB and B/L.
Hook the latch on the side.
Figure 4-51 Replacing Toshiba fluorescent lamp(10)
5. Screwing the PCB and the bezel
1) Use four screws to secure the left and right edge.
Caution: 1) The screw tightening torque is 0.147N·m (1.5kgf·cm) for all screws.
Be careful not to float the screw.
2) Use a Philips screwdriver with type 0 bit.
Screw
Figure 4-52 Replacing Toshiba fluorescent lamp(11)
Portege M200 Maintenance Manual (960-457)
Hook the latch on the top.
Set the bezel on the frame.
4 Replacement Procedures
Hook the latch on the side.
Screw
4-67