4 Replacement Procedures
4.4
Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard. (See Figure 4-4.)
1. Open the display.
2. Insert your nails in the slot of both sides of the keyboard holder and lift it up to
remove.
3. Remove the following screws securing the keyboard.
• M2.5×2.8B
Keyboard holder
PJ3230
4. Lift the top edge of the keyboard and bring the edge to the front to lay on the
computer. Unlock the connector and disconnect the flexible keyboard cable from
the connector on the system board.
5. Remove the keyboard.
4-12
FLAT BIND screw
Figure 4-4 Removing the keyboard
x2
M2.5 x 2.8B FLAT BIND
Portege M200 Maintenance Manual (960 -457)
4.4 Keyboard