Toshiba Portege M200 Maintenance Manual page 45

2.3 Power Supply Troubleshooting
Procedure 1 Power Supply Icon Check
The following two icons indicate the power supply status:
q Battery icon
q DC IN icon
The power supply controller uses the power supply status with the Battery icon and the DC IN
icon as listed in the tables below.
Battery icon Power supply status
Lights orange Battery is charged and the external DC is input. It has no relation with
ON/OFF of the system power.
Lights green Battery is fully charged and the external DC is input. It has no relation
with ON/OFF of the system power.
Blinks orange The battery level is low while the system power is ON.
(even intervals)
Flashes orange The battery level is low and the power switch is pressed on in the
battery driving.
Doesn't light Any condition other than those above.
DC IN icon
Lights green DC power is being supplied from the AC adapter.
Blinks orange Power supply malfunction
Doesn't light Any condition other than those above.
*1 When the power supply controller detects a malfunction, the DC IN icon blinks
orange. It shows an error code.
Portege M200 Maintenance Manual (960-457)
Table 2-1 Battery icon
Table 2-2 DC IN icon
Power supply status
* 1
2 Troubleshooting
2-7