Toshiba Portege M200 Maintenance Manual page 257

4 Replacement Procedures
6. Installing the tapes and insulation sheets
1) Stick the double- faced tape of the insulation sheet.
2) Stick two bezel tapes. (bottom side first)
Caution: 1) Refer to the drawing below.
2) When the tapes and insulation sheets are installed, be careful not to
damage the PCB, cell and B/L.
Figure 4-53 Replacing Toshiba fluorescent lamp(12)
4-68
Double-faced tape of insulation sheet
Stick the tape along the bezel guide
Bezel tape
Stick the tape inside this area
4.24 Fluorescent Lamp
Bezel tape
Stick the tape along the bezel edge
Portege M200 Maintenance Manual (960 -457)