Toshiba Portege M200 Maintenance Manual page 230

4.18 Pen holder/Battery lock/Latch assembly
4.18.2 Battery lock
Removing the Battery lock
The following describes the procedure for removing the Battery lock (See Figure 4-29.)
1. Remove the following screws securing the Battery lock.
• M2.5×4B FLAT BIND screw
2. Remove the Battery lock from the base cover.
M2.5x4B
Install ing the Battery lock
The following describes the procedure for installing the Battery lock (See Figure 4-29)
1. Install the Battery lock on the base cover.
2. Secure the Battery lock with the following screws.
• M2.5×4B FLAT BIND screw
Portege M200 Maintenance Manual (960-457)
FLAT BIND
Figure 4-29 Removing the Battery lock
4 Replacement Procedures
x2
Battery lock
x2
4-41