Toshiba Portege M200 Maintenance Manual page 175

3.26 SETUP
LCD Brightness
Use this option to set the level of LCD brightness.
Super-Bright
Bright
Semi-Bright
Cooling Method
Maximum Performance
Performance
Battery optimized
NOTE: Too hot condition may cause defect on the CPU. When the hot condition
continues, the power is automatically turned off in resume mode.
4. Password
When the incorrect password is continuously entered three times, the cursor does not move
to this option. In this case, reboot the computer and register the password again.
Registered
Not registered
For details on setting the user password, refer to the User's Manual.
5. HDD Password
NOTE: The contents of this option cannot be changed when the setup is started
from the test program.
(1) HDD
This option specifies the HDD to which the password is set. The built-in HDD is
specified and you cannot change it.
Portege M200 Maintenance Manual (960-457)
Full brightness for maximum visibility.
Full brightness for high visibility.
Less than full brightness for saving power.
If the CPU becomes too hot, the fan turns on automatically
in a high speed to cool down the CPU.
If the CPU becomes too hot, the fan turns on automatically.
When the CPU temperature falls to a normal range, the fan
turns off.
If the CPU becomes too hot, the processing speed is lowered. If
the temperature is still too high, the fan turns on. When the
CPU temperature falls to a normal range, the fan is turned
off and the processing speed is increased.
The user password has been registered.
The user password has not been registered.
3 Tests and Diagnostics
3-73