Toshiba Portege M200 Maintenance Manual page 222

4.14 Hinge cables
Note: Arrange the Wireless LAN antenna cable and microphone cable running
between RGB connector and the connectors PJ3540, PJ5206.
Arrange the LCD cable running over the connectors PJ3540, PJ5206.
PJ5206
3. Connect the microphone cable and LCD cable to the connector PJ6000 and
PJ5205 on the system board. Stick the two glass tapes to secure them.
Caution: Arrange the microphone cable running in the copper portion on the
laminate sheet.
Caution: Make sure that the glass tape covering the digitizer cable and LCD power
cable is lower than the connector panel.
Portege M200 Maintenance Manual (960-457)
RGB connector
PJ3540
4 Replacement Procedures
Wireless LAN antenna cable/
Microphone cable
LCD cable
4-33