Toshiba Portege M200 Maintenance Manual page 158

3 Tests and Diagnostics
3.22.2 Operations
Selecting 5-LOG UTILITIES and pressing Enter in the DIAGNOSTIC MENU logs error
information into RAM or onto a floppy disk. The error information is displayed in the following
format:
0003 ERRORS
CNT TS-No PASS STS ADDR
001 FDD 01 0000 110 24015 00 00
002 FDD 01 0001 110 30108 00 00
003 FDD 03 0003 110 23106 00 00
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
2. The error information displayed on the screen can be manipulated by the following number
keys:
The 1 key scrolls the display to the next page.
The 2 key scrolls the display to the previous page.
The 3 key returns to the Diagnostic Menu.
The 4 key erases all error log information in RAM.
The 5 key outputs the error log information to a printer.
The 6 key reads the log information from a floppy disk.
The 7 key writes the log information to a floppy disk.
3. In the case of "error retry OK", a capital "R" will be placed at the beginning of the error
status. However, it is not added to the error count.
3-56
WD RD HSTS [ERROR STATUS NAME]
FDD-CRC ERROR
FDD-CRC ERROR
FDD-CRC ERROR
Portege M200 Maintenance Manual (960-457)
3.22 Log Utilities